Manual

8.1 MENU 52
8.2 GENERAL SETUP 53
8.2.
1 General setup 1/3 53
8.2.1.1 Screensaver customisation 55
8.2.2 General setup 2/3 56
8.2.3 General setup 3/3 57
8.3 RESERVED SETUP 58
8.3.1 LASER calibration 59
8.3.2 CC motor calibration 60
8.3.3 Spindle reset 61
8.3.4 Taper calibration 62
8.3.5 Correction weights 63
8.3.6 Wheel runout 64
8.3.7
Outside rim runout 65
8.3.8 Tread 66
8.3.9 Reserved for technical service 67
8.3.10 Saves the machine calibration 67
8.3.11 Loads the user manual 67
8.3.12 Firmware upgrade 68
8.3.13 Factory setting 69
8.4 MACHINE CALIBRATION 70
8.5 DIMENSIONS 71
8.6 SELF-DIAGNOSTICS 72
8.7 OSK 73
8.8 SOUNDS 74
8.9 INSTRUCTION MANUAL 74
9. Diagnostics 75
10. Maintenance 78
10.1 GENERAL 78
10.1.1 Introductory notes 78
10.1.2 Safety rules 78
10.1.3 Replacing fuses 78