User Manual Instruction Manual

6
2
1
4
3
ST
AR
T
S
T
O
P
Use and maintenance manual Rev. 01-2011
ENGLISH
Machine description
2.1 PURPOSE
It is used to balance the wheels of cars, vans, 4-WD, mo-
torcycles and scooters weighing less than 75 Kg. It can be
operated in the temperature range of 0° to + 45°C.
The machine can operate only on fl
at non resilient fl oor.
To lift the machine, lever only on the base where the 3
support points are located. never, under any circustance,
apply force to other points such as the spindle, head, or
accessory shelf. It functions properly without having to
fasten it to the floor with wheels weighing up to 35 kg; for
heavier wheels, fasten it at the points indicated. Do not
mount anything other than motorbike, car or truck tyres
on the wheel balancer.
Thanks to the new and exclusive VDD (Virtual Direct Drive)
system, reliable unbalance measurements can be made
in a short time, almost half the time of the cycle used with
respect to other balancers in this range.
The main features include:
machine settings menu ▪
direct selection of the metrical or Anglo-Saxon system ▪
optimisation of tyre and rim unbalance. ▪
static programme, ▪ ALUM; SPLIT; indication of exact cor-
rection weight position; self diagnostics; calibration
automatic minimisation of static unbalance ▪
2.2 TECHNICAL SPECIFICATIONS
The following data refers to the balancer in its standard
configuration.
Single-phase power supply 115 / 230 V 50/60 Hz
Protection class IP 54
Max.power consumption 0,65 Kw
Balancing speed 100 min
-1
Cycle time for wheel 4.7 sec. (5 3/4”x14”) 15 Kg.
Max.resolution of measurement 1 gram
Position resolution ± 1.4 °
Average noise < 70 dB (A)
Rim-machine distance 0 - 255 mm
Rim width setting range 1.5” ÷ 20” or 40 ÷ 510 mm
Diameter setting range 10” ÷ 30” or 265 ÷ 765 mm
2.3 DIMENSIONS AND WEIGHTS
The machine weighs 90 kg.
2. Machine description
CONTROL PANEL1.
WEIGHT-TOOL HOLDER2.
LOCK NUT3.
AUTOMATIC GAUGE4.