User Manual

I 0369 - 4

I 0369 - 5









3.3 - Flange mounting

4 - Controls and components

4.1 - Manual distance measurement gauge

This gauge serves to manually measure the distance between the point of application of the counterweight and the

machine.

The wheel balancer is supplied complete with cone

anges

for xing wheels with a central hole. Other optional

anges can be mounted:

a) Remove the threaded end-piece A after unscrewing

the screw B.

b) Mount the new ange (see attached sheets).

Note: CAREFULLY CLEAN THE COUPLING

SURFACES BEFORE PERFORMING ANY

OPERATION.

3.4 - Wheel guard assembly and adjustment (optional)

Fix the components to the base as described in the attachment “WHEEL GUARD ASSEMBLY SEQUENCE” at

the end of the manual.

N.B.: Do not lean on the guard during the wheel balancing cycle.

3.5 - WD spacer (option)

When balancing very wide wheels (9”), there is not enough space to turn the distance gauge. To move the wheel

away from the machine side, t the WD spacer on the ange body and secure it with the standard issue nuts. When

centring the wheel with cone from the inside, mount the DC spacer to obtain spring thrust.