Full Product Manual

ManualsBrandsCen-Tec ManualsAppliance parts25 ft. High Reach Vacuum Attachment Kit with 2-Carbon Fiber Poles and Carry Bag

CARBON FIBER REACH KIT MANUAL

Thank you for your purchase of the Cen-Tec Systems carbon

ber Reach system designed for cleaning of elevated surfaces

to a height of 40 feet without the use of ladders or elevated

platforms. The 94753 Reach system allows cleaning with one,

two or three lightweight carbon ber poles as necessary to the

application. A full compliment of adaptor wands and cleaning

nozzles as well as convenient storage bags for storage and

transport are all included in the solution.

Contact Information

1807 Morrissey Drive • Bloomington, IL • 61704 • US

Phone: 309-664-0328 • Toll Free: 800-833-2822 • Fax: 309-663-8766

E-mail: help@centecsystems.com • Website: www.centecsystems.com

Summary of content (8 pages)

PAGE 1
CARBON FIBER REACH KIT MANUAL Thank you for your purchase of the Cen-Tec Systems carbon fiber Reach system designed for cleaning of elevated surfaces to a height of 40 feet without the use of ladders or elevated platforms. The 94753 Reach system allows cleaning with one, two or three lightweight carbon fiber poles as necessary to the application. A full compliment of adaptor wands and cleaning nozzles as well as convenient storage bags for storage and transport are all included in the solution.
PAGE 2
The primary pole system supporting the Cen-Tec carbon fiber Reach series is comprised of three carbon fiber telescopic pole each pole measuring 6 foot collapsed and extending to 11 feet maximum length. The set is comprised of a base pole connecting to the vacuum hose. A middle extension pole, and a top pole for engaging the adaptors wands for use of the wide range of nozzle.
PAGE 3
The cuff can be attached to a 1.5” hose for smaller vacuums such as backpacks. The poles can be easily extended without the use of tools using a positive snap release system which can be re-engaged to secure the wand at the desired length. The poles can be connected in series using the same snap release system. Using two poles provided cleaning of surfaces from 25 to 30 feet depending on the adaptor wand and cleaning nozzle selected for the job.
PAGE 4
Each internal pole has red warning bands alerting you to the approaching end of the extension. Once the red band comes into view to insure a stable connection and avoid damage to the wands collapse the wand until the red band disappears and lock the wand in place. This captured length protects the stability of the wand system at height and prevent damage to the wand from unsupported leverage when working against the surface being cleaned.
PAGE 5
Each of the four adaptor wands for holding the tool are designed to lock on to adaptor mounted on the top carbon fiber wand in the system for a positive connection that will not separate during use. Each of the four adaptor wands features an ABS compression locking system for securing the cleaning nozzle to the wand. This locking mechanism complete the system with all components from the floor to the cleaning nozzle engaging the surface locked in place preventing unintended separation.
PAGE 6
TITANUS When cleaning tasks day to day are at heights above 30 feet consider the 3 motor Titanus which provides 360 CFM of airflow demanded when working at heights above 30 feet. The Titanus features a tangential entry point, cyclonic filtering cone, and a washable HEPA filter that captures fine particulate. TRANTOR When cleaning tasks day to day are at heights 30 feet and below with an occasional application to 35 feet the Trantor is an ideal vacuum solution.
PAGE 7
When using three poles it is helpful to place the base pole against a fixed surface position yourself at a point on the middle extension pole and use the pivot base pole as a pivot point to walk the poles up to the vertical position. When applications require the use of multiple poles begin by fully extending the upper poles first which can’t be extended once elevated leaving only the base pole collapsed for adjustment as needed to match the surface being cleaned.
PAGE 8
Replacement Parts 60093 39 foot Carbon Fiber Cleaning Pole Set 60291 Chrome Plated Locking Adaptor for Carbon Fiber Reach 60302 Lower Adapter for Carbon Fiber Reach 68591 Locking 18” Straignt Extension with ABS Compression Collar in Black 68613 Locking 24” 130 degree Extension wand with ABS Compression Collar in Black 68690 Steel Locking Collar 68173 200mm Pipe Cleaning Tool with 1.5” Adapter 68184 100mm Pipe Cleaning Tool with 1.