Installation manual

12
Relay Inputs
The Relay Inputs are solid
color wires like the Fuse Inputs.
Also, like the Fuse Inputs, the
color of the Relay Input wire
determines the main color for the
wires of the relay. The Relay
Inputs are as followed:
 Yellow- “RELAY 1 INPUT”
 Blue- “RELAY 2 INPUT”
 Green- “RELAY 3 INPUT”
 White- “RELAY 4 INPUT”
These Input wires will be
connected to the Circuit breakers
found in the parts bag. More on the Relay Input connections on page 16.
Relay 12 Volt
The Relay 12 volt wires are White striped wires, with the exception of relay 4
which has a Blue stripe. The Relay 12 Volt wires are:
 Yellow/ White- “RELAY 1 12 VOLT”
 Blue/ White- “RELAY 2 12 VOLT”
 Green/ White- “RELAY 3 12 VOLT”
 White/ Blue- “RELAY 4 12 VOLT”
The Relay 12 Volt wires provide a power source to the electromagnetic coil inside
the relays which switch, or activate, the relay. The 12 volt wire will be connected to
either a battery constant 12 volt source or to a switched 12 volt source. The power
source a 12 volt wire from the relay connects to will depend on the activation method of
the relay. To determine the activation method that best suits your needs, see pages 14
& 15.