User Manual

Rear Seat Entertainment System with Dual DVD Players
11
RSE and the vehicle’s audio system
Listening to the RSE through the vehicle’s audio system
—Use the PIC MENU to enable the FM transmitter. Press or
to switch FM power on or off.
— With the FM power on, press PIC Menu to select an FM frequency.
Press or to change frequencies.
— When an FM frequency has been selected, press PIC MENU to
highlight SAVE No. Use or to select a number (1-6) in which
to store the frequency.
— Once the location has been selected, press to confirm and save
the selection.
— When this has been done, the SELECT menu will be displayed.
To choose a stored frequency, press .
Press to confirm.
— Tune the vehicle's audio system to the frequency selected.
NOTE
Each RSE unit has its own PIC MENU and preset memory. Each unit
should be set to a different broadcast frequency so that they do not
broadcast to your audio system at the same time. If one of the units is
in AV1 mode, the FM broadcast will be controlled by the neighboring
unit.
Mobile Multi-Media Entertainment System.book Page 11 Wednesday, June 6, 2007 1:49 PM