Installation Guide

13
Step 3: Line Post Installation
3A: Post Spacing
Line posts can be installed by either augering a hole or by using a hydraulic post driver. A spacing of 8’-
12’ is recommended between line posts. Post set closer together will provide a stronger fence. Refer to
Illustration A below for more information.
26" TO 38"
8’- 12’
54”- 58”
Illustration 3-A
3B: Curving Fence Line
If the fence line has gentle curves, like in the case of following the contour of a driveway, then the fence
posts must be reinforced with concrete. Refer to Illustration B for more information. As shown, concrete
footings need to be made with the flat face of the concrete facing the OPPOSITE direction of the curve.
Illustration 3-B