Operating instructions

Page 15For technical questions, please call 1-800-444-3353.SKU 98194
Replacing the Blade
TO REDUCE RISK OF
SERIOUS INJURY:
Return guard to original position
and secure in place after
replacing blade.
Unplug the tool from its power source.1.
      2.
      
3.
(See Figure 3.)
Remove the Shoulder Screw (15). 4.
(See Figure 4 and photo below.)
Shoulder Screw
Raise the Blade Guard and Center 5.
Cover. (See Figure 5.)
6.
use the Wrench to loosen the Arbor Bolt
by turning it clockwise. (See Figure 6.)
Note: The Arbor Bolt has a left hand thread,
so it loosens by turning clockwise.
Remove the Arbor Bolt, Outer Flange 7.
and Saw Blade by pulling them straight
off the Arbor.
WARNING
REV 09j
Figure 3
Figure 4
Figure 5
Figure 6