User guide

11
Choosing the Operating Mode
The thermostat can operate in three different modes: Automatic, Manual or Off. To
set the operating mode press either of the AUTO, MAN or OFF buttons. The screen
indicates which mode is currently active by displaying AUTO, MAN or OFF.
• AUTO (automatic) mode sets the thermostat to follow the built-in temperature
program(defaultorpersonalised).Operatingthethermostatinthismodeisthebest
way to maintain a high level of temperature comfort whilst maximising your energy
savings.
• MAN (manual) mode sets the thermostat to act as a simple thermostat with a
xedsetpointthroughouttheday.Thesetpointcanbeadjustedfrom5°Cto35°C
by using the
or buttons. The thermostat will continue to maintain this
temperature until another operating mode or temperature is selected.
• OFFmodesetsthethermostattocontroltoaminimumtemperaturesettingof5°C
(default)thatactsasafrostprotectionmeasureforyourhome.
During Normal Operation
• Temperature Enquiry
 InAUTO, MAN and OFF operating modes the thermostat will display the current
roomtemperature.Toreviewtheprogrammed‘target’temperature(thetemperature
whichthethermostatistryingtomaintain)pressthe
button. This ‘target’
temperature value will be displayed flashing for 5 seconds before returning to the
current room temperature value.
• Temperature Override
 Duringnormaloperation(AUTOmode)theprogrammedtemperaturecanbe
adjusted manually by pressing the
or buttons or the button. The ‘target’
temperature will be displayed and flash for 5 seconds - during this time the or
buttons can be used to modify the set value.
Note: This temperature override is cancelled at the next programmed temperature
change.
Adjusting the Time
To adjust only the time during normal operation use the or buttons to adjust
the time and press the button again to confirm any changes.
Operating the EHE0200154