ENG ITA Thesis 280 Zoom 7 x 40W LED Moving Head with zoom Thesis 480 Zoom 12 x 40W LED Moving Head with zoom User Manual Manuale Utente Carefully read this manual and properly take care of it Leggete questo manuale e conservatelo per future consultazioni
Dear customer, First of all thanks for purchasing a CENTOLIGHT® product. Our mission is to satisfy all possible needs of light designers and professionals of entertainment lighting, by offering a wide range of products based on the latest technologies. We hope you will be satisfied with this fixture and, if you want to collaborate, we are looking for a feedback from you about product operation and possible improvements to be introduced in the next future. Go to our website www.centolight.
Eng Table of ConTenTs 1- Before you Begin 1.1. 1.2. 1.3. 1.4.
Eng THESIS 280/480 ZOOM User Manual 1 - before you begin Thank you for purchasing THESIS 280/480 ZOOM. Enjoy your new equipment and make sure to read this manual carefully before operation! This user manual is made to provide both an overview of controls, as well as information on how to use them. 1.1.
Eng THESIS 280/480 ZOOM User Manual 1.4. Disclaimer The information and specifications contained in this User Manual are subject to change without notice. CENTOLIGHT assumes no responsibility or liability for any errors or omissions and reserves the right to revise or to create this manual at any time. Copyright© 2021 CENTOLIGHT. All rights reserved.
Eng THESIS 280/480 ZOOM User Manual 3 - MounTing and rigging Pay attention to safety! Please respectively consider the EN 60598-2-17 and the national standard during the installation. Only authorized technicians can carry out the installation. 3.1. Rigging y The installation of the fixture has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming demolition. The installation must always be secured with a secondary safety attachment, e.g.
Eng THESIS 280/480 ZOOM User Manual y The unit can not be used near water; for example near a bathtub, a kitchen sink, a swimming pool, etc. 3.3. Heat y Do not use in a confined space. Always install the product in a location with adequate ventilation, at least 20in (50 cm) from adjacent surfaces. Be sure that no ventilation slots on the product’s housing are blocked. y The apparatus should be located away from heat sources such as radiators, stoves or other appliances that produce heat.
Eng THESIS 280/480 ZOOM User Manual 4.1. Features y LED light: 7x40W (THESIS 280 ZOOM) / 12x40W (THESIS 480 ZOOM) RGBW 4in1 OSRAM® LEDs with around 50000 h lifespan y Beam angle (scan type): 4.
Eng THESIS 280/480 ZOOM User Manual 2) THESIS 480 ZOOM Size 470mm (18.50”) 180mm (7.09”) 338mm (13.31”) 264mm (10.39”) 395mm (15.55”) 5 - ProduCT desCriPTion 5.1. Front Panel 1 STD Mode: 17CH Temp: 23 C FanSpeed:0000RPM 2 3 4 5 UPDATE UP 001 ESC ENTER INVERT DOWN 7 6 1) LCD GRAPHIC DISPLAY It shows the operating mode and other system information. 2) POWER USB Connection External power function with USB connection (to power bank, Laptop, etc.
Eng THESIS 280/480 ZOOM User Manual 3) ESC BUTTON Press to exit from functions without parameters variation, or press repeatedly to go back to main page. 4) UP BUTTON It scrolls individual items up when in selection menus/sub-menus for system settings (DMX address, Fixture, Manual, etc.), and increases parameter values/settings. 5) INVERT BUTTON By pressing this button, the display will rotate by 180°. This can be useful for overhead installation.
Eng THESIS 280/480 ZOOM User Manual 3) FUSE HOLDER Fuse holder with F7AL/250 V fuse (5x20mm). In case of fuse burn, to prevent the risk of fire and damaging the unit, please use only a spare of the recommended fuse type as described. Before replacing the fuse, make sure the unit turned off and disconnected from the AC outlet. 4) POWER OUT SOCKET Power output socket for power supply to additional Centolight fixtures.
Eng THESIS 280/480 ZOOM User Manual 5.4. About Dmx Connection When use a DMX controller, please make sure that there is no interference sources (e.g. intercom, high frequency radio waves and radiation source). DMX machines are designed to receive data through a serial Daisy Chain. A Daisy Chain connection is where the DATA OUT of one fixture connects to the DATA IN of the next fixture.
Eng THESIS 280/480 ZOOM User Manual Signal amplifier is a must to connect more fixtures. 5.6. 3-Pin vs 5-Pin DMX cables DMX connection protocols used by controllers and fixtures manufacturers are not standardized around the world. However, two are the most common standards: 5-Pin XLR and 3-Pin XLR system. If you wish to connect this fixture to a 5-Pin XLR input fixture, you need to use an adapter-cable or make it by yourself.
Eng THESIS 280/480 ZOOM User Manual MainMenu Dmx Address Fixture Manual Information Factory Fixture Reset Display Network 001 6.1. Dmx Address Setting DMX Address setting allows you to set the DMX channel of the machine between 1 and 512. To adjust it, select the parameter using [UP] / [DOWN] buttons (above figure), and press [ENTER] to edit. Increase or decrease the DMX address by using [UP] / [DOWN] buttons again. Then press [ENTER] to confirm, or [ESC] to exit without changing. 6.2.
Eng THESIS 280/480 ZOOM User Manual 2) Run Mode By selecting this option using the [UP] / [DOWN] buttons and then pressing the [ENTER] button, it is possible to select one of the available run mode. They are, respectively: DMX control mode, Master/Slave mode (called HOST), and Sound Control, with which the moving head is controlled by the sound in the surrounding environment. By using [UP] / [DOWN], you can choose the desired running mode.
Eng THESIS 280/480 ZOOM User Manual MainMenu Dmx Address Fixture Manual Information Factory Fixture Reset Display Network 001 Manual Pan Pan Fine Tilt Tilt Fine P/T Speed Dim Strobe Red 000 000 000 000 000 000 000 000 Using again [UP] / [DOWN], the value of each parameter will increase or decrease. Use [ENTER] to confirm, or [ESC] to exit without confirming. 1) Pan Pan adjustment. Range is 0 ÷ 255. 2) Pan Fine Fine Pan adjustment. Range is 0 ÷ 255. 3) Tilt Tilt adjustment. Range is 0 ÷ 255.
Eng THESIS 280/480 ZOOM User Manual 10) Blue Blue color adjustment. Range is 0 ÷ 255. 11) White White color adjustment. Range is 0 ÷ 255 12) Macro Browses all color combinations. Range is 0 ÷ 255. 13) Shape This function replicates all combinations on channel 13 of DMX GUI mode of both models. Range is 0 ÷ 255 (please refer to “7.4. GUI Mode (18CH) Thesis 280 Zoom” on page 25 or to “7.5. GUI Mode (18CH) Thesis 480 Zoom” on page 27).
Eng THESIS 280/480 ZOOM User Manual MainMenu Dmx Address Fixture Manual Information Factory Fixture Reset Display Network 001 Information Time Sensor Temperature Software Version 1) Time Shows information on machine life cycle: • Current Time: Partial operating time. • Total Time: Total operating time. • Power Count: Number of Power-cycles (how many times the unit has been turned on). 2) Sensor This menu provides information on Pan, Tilt, Zoom, Temp and Fan sensors.
Eng THESIS 280/480 ZOOM User Manual MainMenu Dmx Address Fixture Manual Information Factory Fixture Reset Display Network 001 Manual Password Pan Tilt Zoom Red Green Blue White 000 127 127 127 255 255 255 255 All parameters, once set, will be maintained each time the device is turned on. Only the password must be entered each time to enable the modification of parameters contained in this sub-menu. To select parameters sub-menu use [UP] / [DOWN] and then press [ENTER] to modify their values.
Eng THESIS 280/480 ZOOM User Manual MainMenu Dmx Address Fixture Manual Information Factory Fixture Reset Display Network 001 Fixture Reset Motor Reset Factory Cance Cance 1) Motor Reset Normally this function is set to “Cancel”. Switch to “Run” using [UP] / [DOWN] and then [ENTER] , the device will reset Pan, Tilt and Zoom motors. 2) Factory This function must be used only when you want to reset all parameters to the default values. Normally it is set to “Cancel”.
Eng THESIS 280/480 ZOOM User Manual 3) Display Mode When this parameter is set to “Show” the display always remains on. If it is set to “60s”, the display turns off after 60 seconds (if no operation is done). When the display is off, just press any of the control panel buttons to turn it on again. 6.8.
Eng THESIS 280/480 ZOOM User Manual 7.1.
Eng THESIS 280/480 ZOOM User Manual 7.2.
Eng THESIS 280/480 ZOOM User Manual 7.3.
Eng THESIS 280/480 ZOOM User Manual 7.4.
Eng THESIS 280/480 ZOOM User Manual 13 LED 1, LED2, LED 3, LED 5, LED 6 On 133 ÷ 139 LED 2, LED3, LED 4, LED 5, LED 6, LED 7 On 140 ÷146 LED2 to LED7 LEDs will light up dynamically one at a time 147 ÷ 153 The LED2 to LED7 LEDs will light up two at a time dynamically 154 ÷ 160 LED 1 always on; LED2 to LED7 LEDs will light up dynamically one at a time 161 ÷ 167 3 LEDs will light up alternately: (L1, L2, L3) - (L1, L4, L5) - (L1, L6, L7) 168 ÷174 3 LEDs will light up alternately in circular mode
Eng THESIS 280/480 ZOOM User Manual 7.5.
Eng THESIS 280/480 ZOOM User Manual 119 ÷ 125 13 Speed LED2, LED3, LED11 On 140 ÷ 146 LED1, LED3, LED5 On 147 ÷ 153 LED1, LED2, LED3 On 154 ÷ 160 From LED4 to LED12 On 161 ÷ 167 LED1, LED2, LED3, LED5, LED8, LED11 On 168 ÷ 174 The L4 to L12 LEDs will light up one at a time dynamically 175 ÷ 181 The L4 to L12 LEDs will light up two at a time dynamically 182 ÷188 The L4 to L12 LEDs will light up three at a time dynamically 189 ÷195 3 LEDs will light up alternately: (L1, L2, L8) - (L2, L3, L
Eng THESIS 280/480 ZOOM User Manual 7.6.
Eng THESIS 280/480 ZOOM User Manual 8 - luX CHarTs 8.1. Thesis 280 Zoom (Lux) 13810 6810 3282 5 7 10 75 100 150 460 286 140 4.
Eng THESIS 280/480 ZOOM User Manual 8.2. Thesis 480 Zoom (Lux) 13810 6810 3282 5 7 10 75 100 150 460 286 140 4.
Eng THESIS 280/480 ZOOM User Manual 9 - sPeCifiCaTion LED light Thesis 280 Zoom Thesis 480 Zoom 7 x 40W RGBW OSRAM® 12 x 40W RGBW OSRAM® LED Lifespan 5000 Hours Voltage Power consumption 100V-240V 50-60Hz 400W 600W (7R) Amperage Control mode Channel Mode Network function 2,5A DMX512, Master/Slave, Auto, Sound 18CH, 38CH, 17CH, 11CH 18CH, 58CH, 17CH, 11CH Support RDM, Art-Net®, Kling-Net and sACN networking protocols (Optional) Beam angle (Scan type) 4,5° ÷ 45° Dimmer 0-100% (16bit ) CCT
Eng THESIS 280/480 ZOOM User Manual 10 - WarranTy and serviCe / Warning All CENTOLIGHT products feature a limited two-year warranty. This two-year warranty starts from the date of purchase, as shown on your purchase receipt.
Ita Manuale Utente THESIS 280/480 ZOOM soMMario 1- Prima Di Iniziare 35 1.1. 1.2. 1.3. 1.4.
Ita Manuale Utente THESIS 280/480 ZOOM 1 - PriMa di iniziare Grazie per aver acquistato THESIS 280/480 ZOOM. Prima di iniziare, assicuratevi di leggere attentamente questo manuale! E’ stato creato per fornire sia una panoramica dei controlli, sia informazioni su come usarli. 1.1. Cosa è Incluso La confezione include: y 1x testa mobile y 1X Cavo di Rete da 1m (40in c.) con connettore Powercon e Europlug (tedesca) y 1x Cavo da 2m (79in ca.
Ita Manuale Utente THESIS 280/480 ZOOM prestazioni al vostro prodotto. 1.4. Limiti di Responsabilità Le informazioni e le specifiche contenute in questo manuale utente sono soggette a modifiche senza preavviso. CENTOLIGHT non si assume alcuna responsabilità per eventuali errori od omissioni e si riserva il diritto di rivedere o creare questo manuale in qualsiasi momento. Copyright© 2021 CENTOLIGHT. Tutti i diritti riservati.
Ita Manuale Utente THESIS 280/480 ZOOM 3 - MonTaggio e aPPendiMenTo Prestare attenzione alla sicurezza! Si prega di fare sempre riferimento alla direttiva EN 60598-2-17 e agli standard nazionali in fase di installazione. Solo personale autorizzato può eseguire l’installazione. 3.1. Installazione Sospesa y L’installazione del dispositivo deve essere progettata e costruita in un modo che possa sopportare 10 volte il peso per 1 ora, senza alcun cedimento o danneggiamento della struttura.
Ita Manuale Utente THESIS 280/480 ZOOM da bagno, un lavello da cucina, una piscina, ecc. 3.3. Calore y Non usare in uno spazio ristretto. Installare sempre in una posizione con un’adeguata ventilazione, almeno 20” (50 cm) da superfici adiacenti. Assicurarsi che nessuna fessura di ventilazione sull’alloggiamento del prodotto sia bloccato. y L’apparecchio deve essere posto lontano da fonti di calore come radiatori, stufe o altri apparecchi che producono calore.
Ita Manuale Utente THESIS 280/480 ZOOM 4.1. Caratteristiche y Luci LED: 7x40W (Thesis 280 Zoom) / 12x40W (Thesis 480 Zoom) RGBW 4in1 OSRAM® con durata di circa 50000 ore. y Angolo Beam (tipo scan) ): da 4.5°a 45°. y Dimmer elettronico graduale con controllo a 16 bit. y Strobo: 1-20Hz con modalità di lavoro ON e OFF per effetti di luce istantanea.
Ita Manuale Utente THESIS 280/480 ZOOM 2) Dimensiono THESIS 480 ZOOM 470mm (18.50”) 180mm (7.09”) 338mm (13.31”) 264mm (10.39”) 395mm (15.55”) 5 - desCrizione del ProdoTTo 5.1. Pannello Frontale 1 STD Mode: 17CH Temp: 23 C FanSpeed:0000RPM 2 3 4 5 UPDATE UP 001 ESC ENTER INVERT DOWN 7 6 1) Display Grafico LCD Mostra la modalità operativa e altre informazioni di sistema.
Ita Manuale Utente THESIS 280/480 ZOOM questa venga accesa usando il pulsante di accensione. 3) Pulsante ESC Premere questo pulsante per uscire dalle funzioni senza variazione dei parametri o premere ripetutamente per tornare alla videata principale. 4) Pulsante UP Utilizzare questo pulsante per scorrere verso l’alto le voci nel menu di selezione e nei sotto-menu per le impostazioni di sistema (DMX Address, dispositivo, manuale, ecc.).
Ita Manuale Utente THESIS 280/480 ZOOM 2) Interruttore On/Off Interruttore di accensione/spegnimento (On/Off). 3) Porta fusibile Porta fusibile con fusibile F7AL / 250 V (5 x 20 mm). In caso di bruciatura del fusibile, per prevenire il rischio di incendio e di danneggiare l’unità, utilizzare solo un tipo di fusibile consigliato come descritto. Prima di sostituire il fusibile, assicurarsi che l’unità sia spenta e scollegata dalla presa di corrente.
Ita Manuale Utente THESIS 280/480 ZOOM 5.4. Connessioni DMX Quando si utilizza un controller DMX, assicurarsi che non vi siano fonti di interferenza (interfono, onde radio ad alta frequenza e sorgenti di radiazioni). Gli apparecchi DMX sono progettati per ricevere dati attraverso una catena seriale a cascata. Questo tipo di connessione permette di collegare il DMX OUT di un dispositivo al DMX IN del dispositivo successivo.
Ita Manuale Utente THESIS 280/480 ZOOM 5.6. Cavi DMX 3-Poli/5-Poli I protocolli di connessione DMX utilizzati dai produttori di centraline, teste mobilie e fari non sono standardizzati in tutto il mondo. Tuttavia, due sono gli standard più comuni: XLR a 5 poli e sistema XLR a 3 poli.
Ita Manuale Utente THESIS 280/480 ZOOM nuovamente i pulsanti [UP] / [DOWN] si aumenterà / diminuirà il valore dell’indirizzo DMX. Utilizzare il pulsante [ENTER] per confermare o il pulsante [ESC] per uscire senza confermare. 6.2.
Ita Manuale Utente THESIS 280/480 ZOOM dispositivi, verrà attivata la modalità AUTO. 3) Menù Pan Invert Selezionando questa opzione usando i pulsanti [UP] / [DOWN] e quindi premendo il pulsante [ENTER], è possibile impostare il parametro PAN Invert. L’impostazione predefinita di questo parametro è “Close”. Per invertire il Pan, impostare il parametro su “Open”. Usando i pulsanti [UP] / [DOWN], si può scegliere la “Modalità Pan”.
Ita Manuale Utente THESIS 280/480 ZOOM 2) Pan Fine Regolazione fine del Pan. L’intervallo è 0 ÷ 255. 3) Tilt Regolazione del Tilt. L’intervallo è 0 ÷ 255. 4) Tilt Fine Regolazione fine del Tilt. L’intervallo è 0 ÷ 255. 5) P/T Speed Regolazione della velocità per il Pan e il Tilt. L’intervallo è 0 ÷ 255. 6) Dim Regolazione dell’intensità dell’emissione luminosa (Dimmer). L’intervallo è 0 ÷255. 7) Strobe Regola la velocità dei flash nell’effetto strobo. L’intervallo è 0 ÷ 255.
Ita Manuale Utente THESIS 280/480 ZOOM 14) Speed Regolazione della velocità degli effetti dinamici contenuti nell’opzione “Shape”. L’intervallo è 0 ÷ 255 15) Color Selezione del colore di sfondo per ogni effetto selezionato nell’opzione “Shape”. L’intervallo è 0 ÷ 255. 16) BackDim Regolazione della luminosità dello sfondo selezionato nell’opzione “Color”. L’intervallo è 0 ÷ 255. 17) Zoom Regolazione dello Zoom. L’intervallo è 0 ÷ 255 ( 4.5°÷ 44°).
Ita Manuale Utente THESIS 280/480 ZOOM 2) Sensor Selezionando questa opzione si ottengono le informazioni relative al corretto funzionamento dei sensori: Pan, Tilt, Zoom, Temp e Fan. Quando il funzionamento è corretto viene visualizzato TRUE per ogni sensore altrimenti verrà visualzzato FALSE. 3) Temperature Selezionando questa opzione, si ottengono le informazioni relative all temperatura della testa mobile: • Head Temp: Temperatura interna della testa mobile.
Ita Manuale Utente THESIS 280/480 ZOOM 1) Password La password da immettere è 158. Una volta inserita la password si abiliterà la modifica a tutti gli altri parametri. 2) Pan Regolazione fine del Pan per la posizione iniziale dopo l’accensione. Il valore di default è 127. L’intervallo è 0 ÷ 255. 3) Tilt Regolazione fine del Tilt per la posizione iniziale dopo l’accensione. Il valore di default è 127. L’intervallo è 0 ÷ 255. 4) Zoom Regolazione fine dello Zoom per la posizione iniziale dopo l’accensione.
Ita Manuale Utente THESIS 280/480 ZOOM 8) Factory Questa funzione deve essere utilizzata soltanto quando si vogliono reimpostare tutti i valori di default. Normalmente questa è impostata su “Cance”. Quando si passa a “Run”, utilizzando i pulsanti [UP] / [DOWN] e quindi il pulsante [ENTER], il dispositivo resetterà tutti i parametri e le funzioni con i valori di default.
Ita Manuale Utente THESIS 280/480 ZOOM MainMenu Dmx Address Fixture Manual Information Factory Fixture Reset Display Network 001 Network Protocol KlingNet Universe IP Address Subnet Mask ArtNet Disable 000 Nota: Tutti i parametri contenuti in questo sotto-menu saranno descritti in un aggiuntivo manuale di istruzioni relativo alla scheda Network opzionale. 7 - ModaliTÀ dMX Le modalità DMX per entrambe i modelli sono 4.
Ita Manuale Utente THESIS 280/480 ZOOM 8 Strobo 0÷3 Chiusa 4 ÷ 103 Strobo regolare, velocità da lenta a veloce 104 ÷ 107 Aperta 108 ÷ 207 Strobo a impulsi, velocità da lenta a veloce 208 ÷ 212 Aperta 213 ÷ 225 Strobo lenta Casuale 226 ÷ 238 Strobo Casuale con velocità media 239 ÷ 251 Strobo Veloce Casuale 252 ÷ 255 Aperta 9 Rosso 0 ÷ 255 Regolazione intensità Rosso 10 Verde 0 ÷ 255 Regolazione intensità Verde 11 Blù 0 ÷ 255 Regolazione intensità Blù 12 Bianco 0 ÷ 255 Rego
Ita Manuale Utente THESIS 280/480 ZOOM 8 Strobo 9 ÷ 12 R1, G1, B1, W1 226 ÷ 238 Strobo Casuale con velocità media 239 ÷ 251 Strobo Veloce Casuale 252 ÷ 255 Aperta 0 ÷ 255 LED_1 R-G-B-W LED_2 R-G-B-W 13 ÷ 16 R2, G2, B2, W2 0 ÷ 255 17 ÷ 20 R3, G3, B3, W3 0 ÷ 255 LED_3 R-G-B-W 21 ÷ 24 R4, G4, B4, W4 0 ÷ 255 LED_4 R-G-B-W 25 ÷ 28 R5, G5, B5, W5 0 ÷ 255 LED_5 R-G-B-W 29 ÷ 32 R6, G6, B6, W6 0 ÷ 255 LED_6 R-G-B-W 33 ÷ 36 R7, G7, B7, W7 0 ÷ 255 LED_7 R-G-B-W 37 Zoom 0 ÷ 255 Fo
Ita Manuale Utente THESIS 280/480 ZOOM 29 ÷ 32 R6, G6, B6, W6 0 ÷ 255 33 ÷ 36 R7, G7, B7, W7 0 ÷ 255 LED_7 R-G-B-W 37 ÷ 40 R8, G8, B8, W8 0 ÷ 255 LED_8 R-G-B-W 41 ÷ 44 R9, G9, B9, W9 0 ÷ 255 LED_9 R-G-B-W 45 ÷ 48 R10, G10, B10, W10’ 0 ÷ 255 LED_10 R-G-B-W 49 ÷ 52 R11, G11, B11, W11 0 ÷ 255 LED_11 R-G-B-W 53 ÷ 56 R12, G12, B12, W12 0 ÷ 255 LED_12 R-G-B-W 57 Zoom 0 ÷ 255 Focus 0 ÷ 59 Nessun Effetto 58 Reset/Prog LED_6 R-G-B-W 60 ÷ 99 Reset dei Motori 100 ÷ 200 Avvia il p
Ita Manuale Utente THESIS 280/480 ZOOM 13 56 Combinations 28 ÷ 34 LED 5 On 35 ÷ 41 LED 6 On 42 ÷ 48 LED 7 On 49 ÷ 55 LED 2, LED 3 On 56 ÷ 62 LED 4, LED 5 On 63 ÷ 69 LED 6, LED 7 On 70 ÷ 76 LED 1, LED 2, LED 3 On 77 ÷ 83 LED 1, LED 4 LED 5 On 84 ÷ 90 LED 1, LED 6 LED 7 On 91 ÷ 97 LED 1, LED 2 On 98 ÷104 LED 3, LED 6 On 105 ÷111 LED2, LED 3, LED 5, LED 6 On 112 ÷118 LED 1, LED 3, LED 6 On 119 ÷125 LED 2, LED 4, LED 6 On 126 ÷ 132 LED 1, LED2, LED 3, LED 5, LED 6 On 133 ÷ 139
Ita Manuale Utente THESIS 280/480 ZOOM 224 ÷ 230 13 Combinations 14 Speed Si accenderanno alternativamente il LED centrale (L1) e tutti gli altri LED insieme con una sequenza di colori.
Ita Manuale Utente THESIS 280/480 ZOOM 21 ÷ 27 13 58 Combinations LED4 On 28 ÷ 34 LED5 On 35 ÷ 41 LED6 On 42 ÷ 48 LED7 On 49 ÷ 55 LED8 On 56 ÷ 62 LED9 On 63 ÷ 69 LED10 On 70 ÷ 76 LED11 On 77 ÷ 83 LED12 On 84 ÷ 90 LED1, LED6, LED7 On 91 ÷ 97 LED2, LED9, LED10 On 98 ÷ 104 LED3, LED4, LED12 On 105 ÷ 111 LED1, LED6, LED7, LED8 On 112 ÷ 118 LED2, LED9, LED10, LED11 On 119 ÷ 125 LED3, LED4, LED5, LED12 On 126 ÷ 132 LED1, LED2, LED8 On 133 ÷ 139 LED2, LED3, LED11 On 140 ÷ 146
Ita Manuale Utente THESIS 280/480 ZOOM 13 Combinations 14 Speed 245 ÷ 251 Effetto di rotazione colori a gruppi di 4 LED 252 ÷ 255 Effetto di rotazione dei colori 0 ÷ 255 Selezione della velocità degli effetti 15 Shape Back 0 ÷ 255 Selezione del colore di sfondo per ogni effetto 16 BackDim 0 ÷ 255 Luminosità dello sfondo da luminoso a scuro 17 Zoom 0 ÷ 255 Focus 0 ÷ 59 Nessun Effetto 18 Reset/Prog 60 ÷ 99 Reset dei Motori 100 ÷ 200 Avvia il programma Auto 201 ÷ 255 Nessun Effet
Ita Manuale Utente THESIS 280/480 ZOOM 8 - daTi foToMeTriCi 8.1. Thesis 280 Zoom (Lux) 13810 6810 3282 4.5° Distance (m) Diameter (cm) (Lux) 5 7 10 75 100 150 460 286 140 45° Distance (m) Diameter (cm) 5 7 10 400 600 800 13810 6810 3282 8.2. Thesis 480 Zoom (Lux) 4.
Ita Manuale Utente THESIS 280/480 ZOOM (Lux) 460 286 140 45° Distance (m) Diameter (cm) 5 7 10 400 600 800 9 - sPeCifiCHe TeCniCHe Luci LED THESIS 280 Zoom THESIS 480 Zoom 7 x 40W RGBW OSRAM® 12 x 40W RGBW OSRAM® Durata LED 5000 Ore Voltaggio Consumo Energia 100V-240V 50-60Hz 400W 600W (7R) Amperaggio Modalità di controllo Modalità Canale Funzione Network 2,5A DMX512, Master/Slave, Auto, Sound 18CH, 38CH, 17CH, 11CH 18CH, 58CH, 17CH, 11CH Supporta i protocolli di rete RDM, Art-Net®
Ita Manuale Utente THESIS 280/480 ZOOM 10 - garanzia e assisTenza Tutti i prodotti CENTOLIGHT sono coperti da garanzia di due anni. Essa è valida dalla data di acquisto, come indicato dal documento di acquisto.
www.centolight.
www.centolight.com Ver. 1.