Specification Sheet

MODEL NO. 0007-1/2

SINK FITTING

Brecksville, Ohio 44141

Phone: (216) 883-0220 Fax: (440) 526-5745

www.CentralBrass.com

Central Brass

C O M P A N Y

06-16-2008

Installation Drawing

The wall mounted sink tting has a cast brass body

with a polished chrome plated nish. The female inlet

is 1/2-14 NPS straight pipe thread. The outlet has a

plain end. The brass stem, seat, rubber seat washer

and reinforced packing are all easily replaced. The

handle is chrome plated zinc and is not indexed.

ANSI/NSF 61/Section 9 Certied

ASME A112.18.1M

Certified to

ANSI/NSF 61 Section9

PAGE 1
Central Brass C O M P A N Y Brecksville, Ohio 44141 Phone: (216) 883-0220 Fax: (440) 526-5745 www.CentralBrass.com MODEL NO. 0007-1/2 SINK FITTING The wall mounted sink fitting has a cast brass body with a polished chrome plated finish. The female inlet is 1/2-14 NPS straight pipe thread. The outlet has a plain end. The brass stem, seat, rubber seat washer and reinforced packing are all easily replaced. The handle is chrome plated zinc and is not indexed. ANSI/NSF 61/Section 9 Certified ASME A112.18.
PAGE 2
Central Brass C O M P A N Y Brecksville, Ohio 44141 Phone: (216) 883-0220 Fax: (440) 526-5745 www.CentralBrass.com MODEL NO. 0007-1/2 SINK FITTING Parts Breakdown # 1 2 3 4 5 6 7 8 9 10 Part # 1215-RCP PF-263-B 104 901-WNN PF-1855-47RPRC PF-4 809 PF-460 1043 107-F Description Brass Body Brass Seat Brass Screw Rubber Washer Brass Stem Brass Washer Packing Brass Cap Nut Zinc Handle Plain Brass Screw The parts listed in the parts breakdown above may not be offered separately as replacement parts.