Sander User Manual

SKU 42966 For technical questions please call 1-800-444-3353 PAGE 7
To Attach Sanding Paper And The Pad:
1. Ensure that the Pad is firmly screwed onto the Drive Spindle (35). The Orbital
Hub (28) turns to engage the Drive Spindle (35), allowing the Pad (37) to be
threaded on securely. Turn the Orbital Hub (28) back out of the way before use.
If
the Orbital Hub is still in the locked position during use, then the Sander will
not operate properly.
(See Figure C.)
2. The Sander only uses
6” diameter, PSA Stick, (self-sticking) Sanding Paper (not
included). Make sure to attach the Sanding Paper
firmly to the Pad (37).
(See Figure B.)
FIGURE C
BOTTOM VIEW
- LOCKED -
To tighten or
loosen pad
ORBITAL HUB (28)
DRIVE SPINDLE (35)
PAD (37)
THROTTLE LEVER (11)
FIGURE B
DRIVE SPINDLE (35)
- UNLOCKED -
For operation
REV 05/05