Tool Storage User Manual

Page 13For technical questions, please call 1-800-444-3353.Item 60738
SAFETYOPERATIONMAINTENANCE SETUP
FOOT PEDAL (11)
AIR PRESSURE GAUGE (8)
AIR REGULATOR (9)
SCREWS
WASHERS
NUTS
(26)
Figure F
7. Attach the Pressure Gauge (8) and Air Regulator (9)
to the left/front Cabinet Leg (23), using the Screws,
Washers, and Nuts (26) provided. (See Figure F.)
8. Attach the Lamp Housing (1) to the top
of the Cabinet (22), using the Screws,
Washers, and Nuts (26) provided.
NOTE: The two Fluorescent Lamps (3)
come pre-installed.
9. The Grate (39) has one small edge covered by
a Rubber Strip (40). Place the Grate inside the
Cabinet (22) with the Rubber Strip edge to the
right/front of the Cabinet. (See Figure G.)
GRATE (39)
RUBBER STRIP (40)
HERE
(NOT SHOWN)
RIGHT SIDE
VIEW
Figure G