Automobile Accessories User Manual

TRUCK CAB AIR BLOW-GUN KIT,

65041

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

2008 by Harbor Freight Tools

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

SAVE THIS MANUAL

Keep this manual and the receipt in a safe

and dry place for future reference.

Specic Safety Instructions

WARNING: 1.

To prevent injury:

The brass components of this product a.

contain lead, a chemical known to the State

of California to cause birth defects (or other

reproductive harm). (California Health

& Safety Code § 25249.5 et seq.)

Use compressed air only.b.

Wear ANSI-approved safety goggles during c.

installation and use.

Do not exceed 90 PSI air pressure. d.

NOTE: The warnings and precautions

discussed in this manual cannot cover all

possible conditions and situations that may

occur. It must be understood by the opera-

tor that common sense and caution are fac-

tors which cannot be built into this product,

but must be supplied by the operator.

Keep the work area clean and well lighted. .2.

PAGE 1
truck cab air blow-gun kit, 65041 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2008 by Harbor Freight Tools®. All rights reserved.
PAGE 2
3. Keep bystanders, children, and visitors away while operating the tool. 3. Make sure both the truck engine and auxiliary generator is shut down. 4. Obey the manual for the truck cab air compressor used to power this tool. 4. 5. Stay alert. Use common sense. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. Follow manufacturer’s directions for locating the truck cab air line. Usually it is located behind the drivers seat. 5.
PAGE 3
Parts List Part 1 2 3 4 5 6 Discription Trigger Lever T-Fitting Air Line Air Gun Precision Tip Booster Tip Q’ty 1 1 1 1 1 1 Assembly Photo Air Line (3) Trigger Lever (1) Precision Tip (5) Booster Tip (6) Air Gun (4) T-Fitting (2) SKU 65041 For technical questions, please call 1-800-444-3353.
PAGE 4
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.