user manual

Page 8For technical questions, please call 1-800-444-3353.SKU 93785
SPECIFICATIONS
Compressor Type
Single Stage Twin
Cylinder
Maximum Air
Pressure
140 PSI
Maximum Speed 1200 RPM
Air Delivery
(@ 1050 RPM)
10 SCFM @ 40 PSI
8 SCFM @ 90 PSI
7.4 SCFM @ 115 PSI
Oil Type
SAE 30W non-detergent
Air Compressor Oil
(Sold separately)
(SKU 95048)
Flywheel
10-1/4” dia. x 1-7/64”
wide, V-groove
Belt Type A or 4L
Mounting Hole Pattern 5-3/4” x 5”
Overall Dimensions
12-1/4”H x 6-3/4” W x
11-3/4”D
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn off and unplug the motor
before assembling or making
any adjustments to the motor,
tank, and/or compressor
pump.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Functions
Oil Breather
Plug (15)
Oil Sight
Glass (22)
Air Filter (4)
Flywheel
(35)
Cylinder
Head
(5)
Crankcase (16)
Oil Fill
Screw
(13)
Figure 1
Compressor Area Set Up
Designate a work area that is clean 1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury.
Locate the Compressor Pump and 2.
attachments on a at level surface to
ensure proper pump lubrication and
to prevent damage to the unit. Keep
at least 12” of space around the unit
to allow air circulation.
Route the power cord from the motor 3.
to the grounded wall outlet, along a
safe path without creating a tripping
REV 09j, 09k