Specifications

TEBS E2

GIO Functions

for example, connected electronic systems or solenoid valves. The stand-by time

corresponds with the stand-by time of the ECU.

Function

Two 24 V outputs with a steady load of max. 1.5 A can be connected to the Trailer

EBS E Modulator.

The output is monitored only when the TEBS E is switched on. Optionally, monitor-

ing can be deactivated if, for example, components are connected via a switch.

Components

Components / Part number Description Connecting cable

Switch

Not part of WABCO's scope of supply Universal cable

449 535 ... 0

4.15 Road finisher brake

Application

Tipper vehicle

Purpose

The "road finisher brake" function is used for targeted braking of tipper bodies dur-

ing operation with road finishers. In this case, the vehicle trailer is pushed by the

road finisher while tipping.

To prevent rolling back on a slope, TEBS E brakes the tipper inde-

pendently and in accordance with the load.

Function

Mechanical switches can be used for activation in operation (road finisher opera-

tion on/off) and an unloading level switch for the position of the tipper (pushbutton

or proximity switch). When using ECAS valves, tipping of the tipper body can be

detected via the unloading level switch (see chapter 4.3.2 "Driving level", page 57).

The unloading level switch can be activated or deactivated based on the cus-

tomer's wishes. An optional switch can be provided for this or a parameter or a

shut-off on the SmartBoard.

The control pressure defined in the TEBS E Diagnostic Software can be changed

manually via the SmartBoard or Trailer Remote Control. The minimum control

pressure in this case is 0.5 bar and the maximum control pressure is 6.5 bar. The

value last set via the SmartBoard or Trailer Remote Control when switching the

function off is valid again upon switching on again.

The automatic shut-off for this function occurs at speed v > 10 km/h.

Proximity switch

Proximity switches are used in technical processes for position detection of work-

pieces and as triggers for safety measures. The proximity switch works as a con-

tact-free sensor or switch.

The following sensors have also been tested as proximity switches by WABCO:

• Telemecanique XS7C1A1DAM8

• Schönbuch Electronic IO25CT 302408

• Balluff BES M30MF-USC15B-BP03