User's Manual

SUPPLY
NOZZLE
(2)
NEW FLUID
SUPPLY BOTTLE
(1)
KNOB
FIGURE B
SKU 92924 For technical questions, please call 1-800-444-3353 PAGE 6
2. Make sure the vehicle engine is off. Then, chock the vehicle wheels to prevent
the vehicle from moving.
3. Fill the New Fluid Supply Bottle (1) with up to 24 ounces of clean, new, brake
fluid. (Use only the kind of brake fluid recommended by the vehicle manufac-
turer.) Then, screw the Supply Nozzle (2) onto the New Fluid Supply Bottle.
NOTE: Make sure the Knob on the Supply Nozzle is turned to its “CLOSED”
position. (See Figure B.)
4. Remove the cap from the vehicle’s master cylinder. Select the Adapter (3) which
best fits the brake fluid fill hole in the master cylinder, and attach the Adapter to
the Supply Nozzle (2). (See Figure B.)
5. Turn the New Fluid Supply Bottle (1) upside down and insert its tube into the
brake fluid fill hole of the master cylinder, making sure the Adapter (3) fits the
fluid fill hole securely. Make sure the Knob on the Supply Nozzle is turned to its
“OPEN” position. (See Figure B.)
6. Screw the Gun Assembly (6) firmly onto the Old Fluid Container (4). Then, con-
nect the Brake Bleeding Hose w/Connector (5) to the Old Fluid Container.
(See Figure C, next page.)
7. Determine the proper brake bleeding sequence from your vehicle service
manual (i.e., right rear wheel, left rear wheel, right front wheel, left front wheel).
8. Make sure to clean the vehicle brake caliper with brake parts cleaner (not in-
cluded).
ADAPTER (3)
MASTER
CYLINDER
RESERVOIR