User's Manual

SKU 95173 For technical questions, please call 1-800-444-3353 PAGE 2
SPECIFICATIONS
Rivet Capacity (Pin Diameter) 3/32”, 1/8”, 5/32”, 3/16”
Operating Air Pressure 85 to 90 PSI
Air Consumption 4.5 SCFM @ 90 PSI
Air Inlet Size 1/4”-18 NPT
Overall Dimensions 11” High x 10-1/8” Long x 4” Wide
Weight ~3 Pounds
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure that all the parts and accessories listed on
page 10 are included, and the product is intact and undamaged. If any parts are miss-
ing or broken, please call Harbor Freight Tools at the number shown on the cover of this
manual as soon as possible.
SAFETY WARNINGS AND PRECAUTIONS
WARNING! Use eye and hearing protection. Always wear ANSI-ap-
proved safety impact goggles and hearing protection when using this
Riveter. Other people in the work area must also wear appropriate ANSI-
approved safety equipment.
Keep work area clean. Cluttered areas invite accidents.
WARNING! Keep all body parts clear of the Rivets while the Riveter is connected
to the air hose.
Always wear heavy duty work gloves when operating the Riveter.
Stay within air pressure capacity. Never operate the Riveter above 90 PSI.
Observe work area conditions. Keep work area well lit.
Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
Store idle equipment. When not in use, tools must be stored in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
1.
2.
3.
4.
5.
6.
7.
8.