User's Manual

SKU 95173 For technical questions, please call 1-800-444-3353 PAGE 3
Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for which
it was intended. Do not modify this tool, and do not use this tool for a purpose for
which it was not intended.
Dress properly. Do not wear loose clothing or jewelry as they can be caught i mov-
ing parts. Protective, electrically non-conductive clothes and non-skid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running tools or air hoses.
Disconnect air hose and release any built-up air pressure. Never service the
Riveter or disassemble with the air hose attached. Always release any built-up air
even after disconnecting hose. Disconnect the Riveter when not in use.
Remove adjusting wrenches. Check that adjusting wrenches are removed from
the tool and work surface before attaching to an air source.
Avoid unintentional starting. Be sure the Trigger (25) is in the OFF position when
not in use and before plugging in. Do not carry any tool with your finger on the
Trigger, whether it is attached to an air source or not. Do not point the tool towards
yourself or anyone.
Stay alert. Watch what you are doing. Use common sense. Do not operate any
tool when you are tired.
Check for damaged parts. Before using any tool, any part that appears damaged
should be carefully checked to determine that it will operate properly and perform
its intended function. Check for alignment and binding of moving parts, any broken
parts, and any other condition that may affect proper operation. Any part that is
damaged should be properly repaired or replaced by a qualified technician. Do not
use the tool if the Trigger does not operate properly.
Replacement parts and accessories. This product is to be repaired and serviced
only by a qualified technician. When this product is serviced, only identical replace-
ment parts should be used. Use of any other parts will void the warranty. Only use
accessories intended for use with this tool. Approved accessories are available
from Harbor Freight Tools.
Do not operate tool if under the influence of alcohol or drugs. Read warning
labels if taking prescription medicine to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the tool.
Maintenance. The maintenance outlined in the “Maintenance” section of this manual
should be performed regularly. For your safety, this product should be serviced or
repaired regularly only by a qualified technician.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.