User's Manual

SKU 95173 For technical questions, please call 1-800-444-3353 PAGE 4
Compressed air only. Use clean, dry, regulated, compressed air between 85 PSI
and 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other
bottled gas as a power source for this tool.
Fire the Rivets into an appropriate work surface only. This Riveter is designed
for use on metal objects only, and is not suitable for soft surfaces.
Do not fire the Rivets too close to the edge of a workpiece. They may split the
workpiece and cause it to fly free, causing personal injury.
Transport the Riveter safely. Always disconnect the air supply when moving the
tool in the workplace. Carry the tool by the handle and avoid contact with the Trig-
ger (25).
Always attach the Bottle (15) to the Riveter prior to using the tool.
Avoid working alone. If an accident happens, an assistant can bring help.
WARNING! Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contain chemicals known (to the State of California) to
cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints,
Crystalline silica from bricks, cement, and other masonry products,
Arsenic and chromium from chemically treated lumber.
(California Health & Safety Code § 25249.5, et seq.)
WARNING! The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
20.
21.
22.
23.
24.
25.
26.
•
•
•
27.