User's Manual

4. Disconnect the grit supply hose from the tool before making any adjust-
ments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
5. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
6. Maintain tools with care. Do not use a damaged tool. Tag damaged tools “Do
not use” until repaired.
7. Check for misalignment or binding of moving parts, breakage of parts,
damaged air hose (not included), and any other condition that may affect the
tool’s operation. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
8. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
1. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of injury.
SKU 92189 For technical questions, please call 1-800-444-3353 PAGE 4
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Sandblaster Gun. These carry impor-
tant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Use clean, dry, regulated, compressed air from the air compressor to the
sandblaster. Never use oxygen, carbon dioxide, combustible gases, or any
other bottled gas as a power source for this tool.
3. Always disconnect the Sandblaster Gun from its grit supply hose source, and
squeeze the Trigger (42), while pointing unit in a safe direction, to release all
compressed air and grit in the tool before performing any maintenance or
services.