User's Manual

SKU 92189 For technical questions, please call 1-800-444-3353 PAGE 9
3. Daily: With a clean cloth, remove all dirt, grit, and debris from the outer body of
the Sandblaster Gun and from all Nozzle components. If necessary, you may
use a mild detergent. Do not use solvents, as damage to the Sandblaster Gun
may occur. Do not immerse the Sandblaster Gun in any liquids.
4. When storing: Always store the Sandblaster Gun in a clean, dry location out of
reach of children.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL
PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
PARTS LIST
Part # Description Qty. Part # Description Qty.
31 Upper Body 1 41 Screw (ST4.2x12) 2
32 Lower Body 1 42 Trigger 1
33 Metal Pipe 1 43 Roll Pin 1
34+ Intake Connector 1 44 Spring 1
35 Adapter 1 45 Rubber Pad 1
36 Gasket 1 46 Screw (M3x25) 1
37 Ceramic Nozzle 4 47 Pad 1
38 Rubber Adapter 4 48 Nut (M3) 1
39 Nozzle Cap Nut 1 49 Abrasive Gun Assembly 1
40 Screw (ST4.2x12) 4
NOTE:
Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
parts, clogged Ceramic Nozzle, damaged grit supply hose, and any other condi-
tion that may affect it safe operation. If abnormal noise or vibration occurs, have
the problem corrected before further use. Do not use damaged equipment.
*
* 37A = 2mm Nozzle, 37B = 2.5mm Nozzle, 37C = 3mm Nozzle, 37D = 3.5mm Nozzle.
+ 3/8” - 18 NPT