Data Sheet

© 2017 Centralite. All rights reserved.
Data Sheet: Villa In-Wall Relay Switch 3145
Page 3 of 4
Compatibility
The Villa In-Wall Switches feature full compatibility with the Villa Smart Home system.
Technical Specications
Power
120 VAC 60Hz
Supported Loads:
120 VAC 1000W Incandescent
120 VAC 1000W Halogen
120 VAC 1000W Fluorescent
Environmental
Operating Temperature:
0° to +25°C
Standard WarrantySupport
Centralite offers a standard 24-month limited warranty
on the Villa In-Wall Switch
Additional mandatory warranty period in compliance
with local law product is being sold.
If you have questions about the installation of the
Villa Smart Home system please contact Centralite
technical support.
Contact
Toll-Free Phone: [phone]
Email: [e-mail]
Web: www.centralite.com
Shipping / Storage
Temperature: -20° to 50°C
Humidity Range: 0 to 90% RH.
(non-condensing)
Approvals:
Wireless RF
Protocol: ZigBee HA 1.2
TX Strength: +18 dBm
RF Channels: 16
Range: >100 ft. (>30m)
Troubleshooting
Factory Reset and Rejoin
Pull out air gap. While depressing the switch’s top
button, press in air gap. When the status LED turns
solid, release the button. Repeat the “Getting Started”
steps to rejoin the Villa network.
Contact Sales
Notice: Any content, factual information, or specications containing errors in this document are solely inadvertent and will be corrected
upon discovery. Specications for unreleased/planned products are subject to change.
For more information about sales or distribution,
please contact:
North America
877-466-5483
[e-mail]
Centralite Systems, Inc.
1000 Cody Road
Mobile, AL 36695
www.centralite.com
Note
This product will not work in applications where no
neutral connection is present.