User's Manual

CentraLite EMS
Operations, Maintenance & Service Manual
Page 25 of 31
Thermostat Settings
All thermostats should be set as follows from the factory. Factory settings are used to establish a baseline
for thermostat operations. These settings will be overridden by the EMS during automatic energy
management processes. Newly replaced thermostats should be set to a SETPOINT temperature of 71
degrees F.
Thermostat Default Settings:
Description Setting
- Low SETPOINT Limit 60
- High SETPOINT Limit 80
- Setback Variance 3
- Deep Setback Variance 6