User Manual

What should I call it?
You should give each Keyfob the name
of the person who will k eep it. So, if one
Keyfob will belong to Billy, call the
Keyfob "Billy" here on the website.
Then, AlertMe can show you who is at
home at any given time, and can tell
you who set the alarm when they left
the house, and so on.
I can't see a flashing
light on it
The light, when flashing, is in the
position of the green dot here:
When you first put the battery in, you
should expect to see the Keyfob light
blink twice every few seconds; the light
will go out once the Keyfob is
communicating with the Hub. The light
will come on again when this Keyfob is
selected for naming on the website. If
you aren't naming this Keyfob, it most
likely will not be flashing its light.
What does the flashing
light mean whilst I'm
naming it?
When this Keyfob is selected for naming
on the website it will flash regularly
once a second (whilst it is in a good
Getting started with the Keyfob - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
3 of 5 10/10/08 11:59