User Manual

a section for each type of Accessory,
illustrated with a number which
matches the packaging number for that
Accesory type. If any are missing, click
here. If all your Accessories are
present and cor rect on the website,
click on to the next page.
The r est of the installation is quite
straightforward. One by one, we
will go through each system or
service offered by AlertMe, and will
install the Accessories for that
service in tur n. For each Accessor y,
you will then position that
Accessor y in your home, with
guidance from its light as to wher e
is a good spot, and then you will
return to the website to give it a
nam e. The website will walk you
through the installation and test the
wireless network signal strength as you
position each Accessory, ensuring that
it will work well. The guidelines give
more information about Accessory
positioning.
You can now move onto Installing the
Lamp system.
Turning on Accessories
The Lamp
The Lamp may go dark if you
unplug it from the mains, but
should light up after being
plugged in, and flash twice every 4
seconds or so for a short while.
(The Lamp power supply cable fits
into a little hole on the bottom of
the Lamp, which may contain a
plastic "bung" when you first
receive the Lamp - you'll need to
Starting up the Accessories - Alertme http://wiki.alertme.com/wiki/index.php/Starting_up_...
3 of 5 10/10/08 11:33