User Manual

Personalisation
Phone calls
Purchasing
Security
Subscription
Text messages
Users
Website
Wireless network
check the power and Ethernet cables, and wait 5
minutes, then try again.
If you use MAC address filtering on your
broadband gateway...
then you may need to set up the Hub MAC
address on your gateway. If you type in your Hub
ID to the AlertMe website, and your Hub does not
connect (because you use MAC filtering), the
error message on the website will tell you the
Hub MAC address, so you can now enter it in
your broadband router configuration.
TalkTalk users, click here
Retrieved from "http://wiki.alertme.com
/wik i/index.php
/The_Hub_does_not_seem_to_connect_to_AlertMe"
Categories: Installation | Hub
T he Hub does not seem to connect to AlertMe - Al... http://wiki.alertme.com/wiki/index.php/T he_Hub_do...
2 of 2 10/10/08 12:18