User Manual

it onto the back of the Alarm Detector and
press firmly for a few seconds. Then, peel
off the printed part of the cover sheet off
the pad you just stuck down, and press the
Alarm Detector against the surface you
want to stick it to firmly for a few seconds.
Done!
What does the flashing
light mean whilst I'm
installing it?
When this Alarm Detector is selected for
placement on the website it will flash
regularly once a second (whilst it is in a
good position for the Accessory to be
installed), or it will blink twice every few
seconds (if it is not in a good position).
You should hold the Alarm Detector still in
the place you want to install it for about 5
seconds. If the light flashes regularly once
a second all that time, it is a good spot to
install it. If it doesn't, you should try
moving the Alarm Detector somewhat -
read our tips here.
I can't get it to flash
regularly where I want to
install it
Check you have followed our Accessory
positioning guidelines. For help with
getting Accessories to communicate with
your Hub all around your home, click here.
What does the flashing
light mean when I'm
Getting started with the Alarm Detector - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
4 of 5 10/10/08 11:59