User Manual

Personalisation
Phone calls
Purchasing
Security
Subscription
Text messages
Users
Website
Wireless network
There's more info here.
How do I start it up?
To put in a battery, squeeze the tabs on
opposite sides of the sensor and lift off
the front (see here for pictures or here
for a movie). The battery is supplied by
AlertMe in the Button box. Clip the
back on the sensor again when you
have put the battery in. The light
should then blink twice every few
seconds for a while; this will stop once
the Button is communicating with the
Hub. If the light does not turn on at all,
then click here for help.
If it stops flashing, but does not appear
on the website as an icon, wait a few
minutes. If that doesn't work , try
taking the battery out for 10 seconds,
replacing it, and waiting another few
minutes. If it still doesn't appear, click
here.
Where should I put it?
If your Button is to be an AlertMe
Doorbell, then you should place it
where you would put a doorbell! If you
are going to use your Button for
something else, then it should be clear
where you would want it for that
reason.
You should also try to follow our general
Accessory positioning guidelines.
If you are having problems positioning
it, try reading our help on positioning.
Getting started with the Button - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
2 of 5 10/10/08 11:59