User Manual

position to be used), or it will blink
twice every few seconds (if it is not in a
good position, and cannot communicate
with the Hub).
What does the flashing
light mean when I'm
testing it?
Once you have installed your Keyfob,
the light will go out for the remainder
of the Alertme setup process. When you
reach the testing stage, the light will
come on whenever either Keyfob button
is pressed. For more information about
testing, click here.
What is the little
thingy in the box with
my Keyfob?
In some cases you may find a small
plastic bag inside the Keyfob box, which
contains a little metal tag. This tag can
be used to open the Keyfob (just insert
the small end into the slot in the
Keyfob, and twist the tag). If the tag is
big enough, you may wish to use it on
the Keyfob keyring, writing on it to
label which Keyfob this is. (There are
two versions of the tag - tiny, and
bigger!)
If you have a trial/beta version of
AlertMe, then you probably won't find
one.
Retrieved from "http://wiki.alertme.com
/wik i/index.php
/Getting_started_with_the_Keyfob"
Getting started with the Keyfob - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
4 of 5 10/10/08 11:59