User Manual

Personalisation
Phone calls
Purchasing
Security
Subscription
Text messages
Users
Website
Wireless network
Naming the Keyfob
On the walkthrough page on AlertMe's
secure website you should now be able
to see all the Accessories you have not
yet set up, including the Keyfob you are
about to set up. Your Keyfobs should be
near your Hub with their lights turned
off. If you click a Keyfob icon on the
website, you should see the light on
one of the Keyfobs near your Hub
start to flash on and off regularly.
This is the one to name now.
You should now be able to give the
Keyfob a name in the box. You can give
the Keyfob a name, such as Fred; it is
best to give a Keyfob the name of the
person who will carry the Keyfob. If you
are not giving the Keyfob to someone at
this point, you might want to name a
Keyfob "Spare", or "Kitchen Drawer".
When you've named all your Keyfobs,
you can now move on to Installing the
Emergency Alarm.
Find out more about what the Keyfob is
and what it does here (leaving the
installation user guide - you might want
to open this page in another tab or
window).
Retrieved from "http://wiki.alertme.com
/wik i/index.php/Installing_the_Keyfobs"
Categories: Installation | Keyfob |
Batteries | Wireless network |
Accessories
This page was last modified 15:59, 3 January 2008.
This page has been accessed 144 times.
Content is available under GNU Free Documentation License 1.2.
Privacy policy
About Alertme
Disclaimers
Installing the Keyfobs - Alertme http://wiki.alertme.com/wiki/index.php/Installing_th...
2 of 2 10/10/08 11:34