User Manual

Personalisation
Phone calls
Purchasing
Security
Subscription
Text messages
Users
Website
Wireless network
yourself. It look s lik e this:
Nice, isn't it? There's more info here.
How do I start it up?
Plug the Lamp power supply into a
mains power socket, somewhere near
the Hub, and plug the power supply
cable into the Lamp (click here for a
movie showing this). Then press the
Button on the base of the Lam p
once.
The light should then blink twice every
few seconds for a while; this will stop
once the Lamp is communicating with
the Hub. The Lamp may go dark if you
unplug it from the mains, but will work
fine when plugged in again (this is
because the backup battery inside it
may not be fully charged yet). If the
light does not turn on at all, then click
here for help.
The Lamp power connector may be a
little tricky to plug into the Lamp, but
don't worry, you won't break it.
If your Lamp does not light up at
all, click here.
Where should I put it?
You should position your lamp
som ewhere you will enjoy it, but
also som ewher e not too close to
Getting started with the Lamp - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
2 of 5 10/10/08 11:59