User Manual

takes to get to a better place. If moving
it around does not work , try another
location. If you cannot find a good spot
anywhere near there, it might be that
you are out of range of the Hub. If you
cannot find a good spot for your lamp,
read more about how to fix any issues
with the wireless network.
As you position your Lamp, you should
mak e sure you select a location where
the Lamp is flashing regularly all the
time. You may wish to place the
Lam p, connect it to m ains power,
and then watch it for 5 to 10
seconds to ensure that it continues to
flash, confirming that this is a good
position for the Lamp where it can be
in constant contact with your Hub. If
you have any problems with finding a
position for your Lamp where the light
stays flashing, click here for help.
Naming the Lamp
Now you should have successfully
positioned the Lamp in your home.
On the website, click OK to say you
have positioned your Lamp; you can now
name your Lamp in the box. You can
give the Lamp a name, such as First
Floor Night Light, or AlertMe Status
Lamp. The name is entirely up to you,
and may reflect the use of your lamp, or
the location of the lamp, or anything
else! (Feel free to call your Lamp Bob, if
you like.) By default your Lamp is called
Lamp 1, if you just have the one Lamp.
(Later on, you will have the opportunity
to assign the Lamp to a room in your
home, if you opt to set up Rooms on the
AlertMe secure website. For now, you
just need to give it a name.)
Great! You have installed your Lamp.
You can install another Lamp now if
Installing the Lamp - Alertme http://wiki.alertme.com/wiki/index.php/Installing_th...
3 of 4 10/10/08 11:32