User Manual

Personalisation
Phone calls
Purchasing
Security
Subscription
Text messages
Users
Website
Wireless network
It look s out across your home from a
vantage point near the top of a wall.
There's more info here.
How do I start it up?
To put in a battery, squeeze the tabs on
opposite sides of the sensor, and lift off the
front (see here for pictures or here for a
movie). The battery is supplied by AlertMe
in the Motion Sensor box. Clip the back
on the sensor again when you have put
the battery in. The light should then
blink twice every few seconds for a while;
this will stop once the Motion Sensor is
communicating with the Hub. If the light
does not turn on at all, then click here
for help.
If it stops flashing, but does not appear on
the website as an icon, wait a few
minutes. If that doesn't work , try taking
the battery out for 10 seconds, replacing
it, and waiting another few minutes. If it
still doesn't appear, click here.
Where should I put it?
Motion Sensors protect areas you think an
intruder might walk through - they are
good in hallways, for example. They are
also excellent for monitoring areas where
there are many external access points
(doors and windows), where a lot of
Door/Window Sensors would be needed.
The Motion Sensor can be used to
check for activity in a room or area
in your home. The Motion Sensor is
Getting started with the Motion Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
2 of 5 10/10/08 11:58