User Manual

designed for use indoors. A hallway,
or in a ground floor r oom pointing
towards a door , are good choices. You
should position it so that it has a good
view across the area you want to
protect, but try to position your
Motion Detector so that it points away
from windows or exter ior doors. Your
AlertMe Motion Sensor will sense motion
in a range up to 10m. Make sure you put
the Motion Detector the right way up!
Bear in mind that the Motion Detector
may detect medium to large pets.
You have the choice of positioning the
Motion Sensor flat on one wall, or on a
corner between two walls. These two
options are illustrated here, which also
shows the "right way up"!
You should also try to follow our general
Accessory positioning guidelines.
If you are having problems positioning it,
try reading our help on positioning.
I can't see a flashing
light on it
The light, when flashing, is in the
position of the green dot here:
When you first put the battery in, you
should expect to see the Motion Sensor
light blink twice every few seconds; the
light will go out once the Motion Sensor is
communicating with the Hub. The light
will come on again when this Motion
Sensor is selected for placement on the
website; then, it will flash regularly once
Getting started with the Motion Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
3 of 5 10/10/08 11:58