User Manual

a second (if it is in a good position for the
Accessory to be installed), or it will blink
twice every few seconds (if it is not in a
good position). If you aren't placing this
Motion Sensor, it most lik ely will not be
flashing its light.
How do I stick it up?
You have the choice of positioning the
Motion Sensor flat on one wall, or on a
corner between two walls. These two
options are illustrated here.
Firstly, mak e sure you know how to use
the sticky pads! If you haven't already
read the instructions for these, do so now
here.
Peel a sticky pad off the backing sheet,
put it onto the back of the Motion Sensor
and press firmly for a few seconds. Then,
peel off the printed part of the cover sheet
off the pad you just stuck down, and press
the Motion Sensor against the surface you
want to stick it to firmly for a few seconds.
Done!
What does the flashing
light mean whilst I'm
installing it?
When this Motion Sensor is selected for
placement on the website it will flash
regularly once a second (whilst it is in a
good position for the Accessory to be
installed), or it will blink twice every few
seconds (if it is not in a good position).
You should hold the Motion Sensor still in
the place you want to install it for about 5
seconds. If the light flashes regularly once
Getting started with the Motion Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
4 of 5 10/10/08 11:58