User Manual

From Alertme
User Guide front page
Recent changes
List of all pages
How to use this Guide
Getting Started
Quick Answers
Personalising your system
Using AlertMe
Troubleshooting
About AlertMe
Categories:
Accessories
Batteries
Button
Emails
Emergency alarm
Friends
Green
Help
History
Home network ing
Home safety
Hub
Installation
Intruder alarm
Keyfob
Kit
Lamp
Legal
Messages
Installing the
Motion Sensor
From Alertme
This Accessory is installed as part of the
Intruder Alarm.
Questions about the Motion Sensor?
Click Getting started with the
Motion Sensor .
Where to put the Motion
Sensor
The Motion Sensor can be used to
check for activity in a room or area
in your home. The Motion Sensor is
designed for use indoors. A hallway,
or in a ground floor r oom pointing
towards a door , are good choices.
You should position it so that it has
a good view across the area you want
to pr otect, but try to position your
Motion Detector so that it points
away from windows or exterior
doors. Your AlertMe Motion Sensor will
sense motion in a range up to 10m.
Make sure you put the Motion Detector
the right way up! Bear in mind that
the Motion Detector may detect medium
to large pets.
You have the choice of positioning the
Motion Sensor flat on one wall, or on a
corner between two walls. These two
options are illustrated here.
Installing the Motion Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Installing_t...
1 of 4 10/10/08 11:32