User Manual

Personalisation
Phone calls
Purchasing
Security
Subscription
Text messages
Users
Website
Wireless network
There are general guidelines about
positioning AlertMe Accessories here.
For more information about the Motion
Sensor, click here.
Repeat the following instructions
for each Motion Sensor you have. It
is a good idea before you start to
think about where you will install
each of your sensors to best secur e
your hom e.
Positioning the Motion Sensor
in your home
All Motion Sensors which you have not
yet set up should currently be near to
your Hub, and their lights should be off.
On the walkthrough page on AlertMe's
secure website you should now be able
to see all the Accessories you have not
yet set up, including the Motion Sensor
you are about to install. If you click a
Motion Sensor icon, you should see
the light on one of the Motion
Sensors near your Hub start to flash
on and off regularly. This is the one
to install now.
Take this Motion Sensor to where
ever you wish to put it. As you m ove
around your home, the light on
your Motion Sensor may continue to
flash r egularly, or the light may
start to blink twice every few
seconds. When the light is blink ing,
that means that you are not in a good
location to install your Motion Sensor,
as the radio signal is not good enough.
Don't panic! There are two reasons the
light might do this. One is that you are
in a slightly bad spot for the wireless
network ; you may find that moving the
sensor just a few inches one way or
another is all it takes to get to a better
place. If moving it around does not
work , try another location. If you
Installing the Motion Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Installing_t...
2 of 4 10/10/08 11:32