User Manual

two stick y pads, one at either end of
the sensor.
For the magnet we supply special, small
sticky pads, which you use in the same
way as the big ones.
Check out the pictures!
What does the flashing
light mean whilst I'm
installing it?
When this Door/Window Sensor is
selected for placement on the website it
will flash regularly once a second
(whilst it is in a good position for the
Accessory to be installed), or it will
blink twice every few seconds (if it is
not in a good position).
You should hold the Door/Window
Sensor still in the place you want to
install it for about 5 seconds. If the
light flashes regularly once a second all
that time, it is a good spot to install it.
If it doesn't, you should try moving the
Door/Window Sensor somewhat - read
our tips here.
I can't get it to flash
regularly where I want
to install it
Check you have followed our Accessory
positioning guidelines. For help with
getting Accessories to communicate
with your Hub all around your home,
click here.
What does the flashing
Getting started with the Door/Window Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
5 of 6 10/10/08 11:59