User's Guide
Thermostat overview
The thermostat widget on the dashboard gives you control of the heating and cooling
in your home.
You may also congure your SmartKeyfobs so that heating and cooling changes
automatically as you come and go through the day; adjust the automatic time
schedules to best suit you lifestyle or simply turn the temperature up and down.
Thermostat
Hold (Cool / Heat)
Where you wish to set a temperature target at any time, then
once reached the tenperature will stay at this level until
changed
Auto (Cool / Heat)
Setting up your online thermostat for Automatic Control
1. Click on the Thermostat widget on your dashboard to enter the detailed
screen
2. Switch to Heating or Cooling mode as required
3. Set the Temperature slider to Auto
4. Check your temperature schedule and adjust the temperatures for ‘Night’
and ‘Day’ as required.
5. Set an Away temperature for when you are out of the house. The Away
temperature setting is located at the bottom of the screen.
6. Select ‘set up keyfobs’ to decide which SmartKeytfobs will be active.
7. Save your settings by clicking on the ‘Submit’ button at the bottom of
the screen.
8. Your SmartKeyfobs are already set up to operate your Thermostat. Just
attach them to your house keys to enjoy the convenience of automatic
Thermostat control.
By setting up an automatic heating schedule you can set your heating to suit your home. You can ensure your house is at a comfortable temperature
when you’re at home as well as knowing you’re not wasting unnecessary energy when you’re out, therefore saving you money.
The ‘Simple’ mode allows you to change either weekdays or weekends, while
the ‘Advanced’ mode lets you edit times and temperatures on a day by day
basis.
Drag the borders to set up your prefered time periods for each day; then select
the temperatures icon in each period to adjust your required termperature level.
Remember, if you make changes don’t forget to click ‘submit’ to save them.
Your new schedule will be sent to your in-home heating controller within two
minutes.
The automatic schedule can be overridden at anytime, so if you come home earlier than expected or want to change the temperature slightly, that can
still be done.
Heating schedule (Cool / Heat)
Using your thermostat manually
To manually adjust the temperature in your home:
1. Touch the large number on your In Home Thermostat
2. Use the arrow icons to adjust the temperature.
3. Press the house to save your adjustment.
Press the mode button on the right hand side of your In Home Thermostat to change modes. You can cycle through Heat, Cool or O by pressing
this button.