User's Guide
Quick Start Guide
Your AlertMe Hub and In Home Thermostat (CT30) have already been
installed so you are almost ready to go. To start using your AlertMe
Climate Control system, follow these simple steps.
Accessing your Online Thermostat
To access your Online Thermostat dashboard go to {XXX}.alertme.com and sign in
using the username and password that have been given to you.
Tip! Bookmark this page so you can easily access your system again in the future
Setting up your Online Thermostat and enabling Automatic Control
a. Click on the Thermostat widget on your dashboard to enter the detailed screen
b. Switch to Heating or Cooling mode as required
c. Set the Temperature slider to Auto
d. Check your temperature schedule and adjust the temperatures for ‘Night’ and
‘Day’ as required.
e. Set an Away temperatur
e for when you are out of the house. The Away
temperature setting is located at the bottom of the screen.
f. Make sure to submit your settings by clicking on the ‘Submit’ button at the bottom
of the screen.
g. Your Keyfobs are already set up to operate your Thermostat so just attach one of
them to your house keys to enjoy the convenience of automatic Thermostat control.
Adjusting Temperature manually online
Using the website or iPhone app, on your Temperature widget, simply adjust the
temperature slider up or down to select the temperature you want. Any changes
will take eect within 10 minutes.
Note: If you are in Auto mode and have manually changed the temperature your
Thermostat will return to its pre- programmed temperature whenever you enter or
leave the house, or at the next program time (for example when you go to bed).