User Manual

cannot find a good spot anywhere near
there, it might be that you are out of
range of the Hub. Moving your Lamp
nearer to where you want to install this
sensor might be the answer - read more
about tweak ing your system for better
wireless network coverage.
As you position your Motion Sensor ,
you should m ake sure you select a
location wher e the Motion Sensor
light is flashing continuously. You
may wish to place the Motion Sensor
somewhere, and then watch it for 5 to
10 seconds to ensure that it continues
to flash, confirming that this is a good
position where it can be in constant
contact with your Hub. Once you have
found a good spot, fix the Motion
Sensor in place with a sticky pad
(read the instructions fir st!).
If you have any problems with finding a
position for your Motion Sensor where
the light stays flashing, click here for
help. If you have any problems deciding
where to place the Motion Sensor, or
actually fixing it in place, click here.
Naming the Motion Sensor
Now you should have successfully
positioned the Motion Sensor in your
home.
On the website, you can now name it in
the box. You can give the Motion Sensor
a name, such as Hallway Motion
Sensor.
(Later on, you will have the opportunity
to assign the Motion Sensor to a room
in your home, if you opt to set up Rooms
on the AlertMe secure website. For now,
you just need to give it a name.)
Great! You have installed your Motion
Sensor.
Installing the Motion Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Installing_t...
3 of 4 10/10/08 11:32