User Manual

Personalisation
Phone calls
Purchasing
Security
Subscription
Text messages
Users
Website
Wireless network
AlertMe Intruder Alarm system. As well
as alerting you to intruders, this check s
that you've shut all your doors and
windows before going out! The
Door/Window Sensor is battery powered
and look s lik e this:
The big part is the main sensor, and
the little part is a magnet. It work s by
detecting if the two parts are very close
together (meaning the door, or window,
is shut), or far apart (meaning it is
open!). There's more info here.
How do I start it up?
To put in a battery, squeeze the tabs on
opposite sides of the big part of the
sensor, and lift off the front (see here
for pictures or here for a movie). The
battery is supplied by AlertMe in the
Door/Window Sensor box. Clip the back
on the sensor again when you have put
the battery in. The light should then
blink twice every few seconds for a
while; this will stop once the
Door/Window Sensor is communicating
with the Hub. If the light does not turn
on at all, then click here for help.
If it stops flashing, but does not appear
on the website as an icon, wait a few
minutes. If that doesn't work , try
taking the battery out for 10 seconds,
replacing it, and waiting another few
minutes. If it still doesn't appear, click
here.
Where should I put it?
Getting started with the Door/Window Sensor - Alertme http://wiki.alertme.com/wiki/index.php/Getting_star...
2 of 6 10/10/08 11:59