4015115/4015116/4015117 Black Oak / Light Oak / Cherrywood Wireless Panel Speaker With Infrared Remote Control USER GUIDE For use with:
Introduction These 900 MHz stereo wireless speaker system uses the latest wireless technology that enables you to enjoy music and TV sound anywhere inside or outside your home. You can simply connect the system to any audio source such as Radio, TV, VCR, Hi-Fi and CD/MP3/VCD/DVD player. Without complicated wiring and installation with your Audio/Video equipments and rear channel amplifier, the system enables you to enjoy thrilling, lifelike sound stereo in minutes. Features 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Installation 3. Plug the AC power adapter in the DC jack located on the rear of the transmitter. 3/8 jack 4. 5. The rear of the transmitter has one audio cord that can be connected to audio output jack of a TV, Monitor, VCR, Radio, CD/MP3/VCD/DVD player or to a headphone/earphone jack with the connector provided. Plug the adapter into the AC source and the blue POWER LED will illuminate. If the blue POWER LED does not illuminate, make sure the adaptor is plugged in properly. Speaker Receiver 1.
Installation 2. Switch on the speaker by pressing the POWER switch and the POWER/STEREO LED will light up in blue. Switch off the speaker by pressing the POWER switch again. Operation 1. Turn on the audio source (TV or audio component) to which the transmitter is connected with. As soon as the transmitter receives the audio signal, the green SIGNAL LED will illuminate. 2. Select the channel 1 or 2 of the transmitter for best performance in your location.
Installation 3. Press the + / - (volume level) button on the speaker and adjust the volume to the desired listening level. 4. Push the “AUTO SCAN” button on the speaker or Remote Control to get the best tuning reception. When the button is pressed, frequency tuning starts automatically and it stops when a signal is detected. A) Keep a distance from the speaker up to 7 meters apart from the transmitter, and then press the “AUTO SCAN” button for the best tuning reception.
Installation 5. The BOOST BASS button can be used to enhance the bass sound depending on your own music preferences. Turn bass/boost effect ON simply by pressing the button, and pressing it once again to OFF. Remote Control Unit 1. Remove the battery cover at the rear of the remote control unit and insert 2 “AAA” size batteries (not included) into the battery compartment with the correct polarity. 2. Replace the cover to close the battery compartment.
Trouble Shooting No Sound - Ensure the AC adaptor is fully inserted into the AC outlet and the power connection input on the transmitter. - Ensure the speaker switch is ON. - Speaker’s battery capacity is too low, replace with new batteries or connect the AC adaptors to the speakers. - Ensure the TV or audio component is ON. - The connected audio / video equipment is not playing. Start playing the equipment. - The volume of speaker is too low, adjust the volume to an appropriate level.
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device must be used accompany with the provided AC/DC adapter. The provided AC/DC adapter shall always remain readily operable. Please use the device in normal indoor environment. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc.
Warranty ORBYX ELECTRONICS WARRANTY ORBYX Electronics warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. Within this period, simply take the product and your proof of purchase to any ORBYX Electronics store or dealer and the product will be repaired without charge for parts and labour. ORBYX Electronics reserves the right to charge for transportation.
