Technical information

3
User’s manual
EN
IDENTIFICATION OF MANUFACTURER AND EQUIPMENT
The nameplate shown here is applied directly onto the appliance.
It contains references and all the information essential for safely
operating the device.
For any technical requirements, please contact the Manufacturer’s
Technical Service Centre or an authorised dealer.
For technical assistance, please indicate the data reported on the
identication plate, the approximate hours of use and the type of
fault detected.
A. Name of manufacturer.
B. CE conformity label.
C. Model / serial number / manufacturing year.
D. Technical data: voltage, current, protection rating, mass,
cutting width.
Zucchetti Centro Sistemi S.P.A
Via Lungarno 305/A - 52028 Terranuova B.ni (AR)
0000
00000000000000000
00000000000000000
(C) Manufacturing year
(C) Model
(B) EC conformity label
(A) Name of manufacturer
(D) Technical specifications
(C) Serial number
DATA PLATE
SAFETY INFORMATION
SAFETY REGULATIONS
•
During design and construction, the manufacturer carefully considered the possible hazards and personal risks that may
result from interacting with the equipment. In addition to observing the applicable laws in force, the manufacturer adopted all
the “good manufacturing practice regulations.” The purpose of this information is to inform users on the need to use extreme
caution to avoid risks.
•
Before using the rst time, read the entire manual carefully and make sure you have understood it completely. It is important
that you have understood all the information regarding safety.
•
Lift and handle the equipment according to the information reported on the packaging, on the appliance and in the user
instructions supplied by the Manufacturer.
•
Pay attention to the symbols that appear on all the safety labels. They are coded by shape and colour for safety purposes.
Keep them legible and always follow the instructions indicated.
•
The lawnmower robot may only be used by people who know how it works and who have read and understood the manual.
•
Only use the machine for uses foreseen by the manufacturer. Using the machine improperly can cause risks for people's
health and safety and economic damage. Bear in mind that the operator or user is responsible for accidents or unexpected
events occurring to other people or their property.
•
Before using the lawn mower robot , make sure there are no objects on the lawn (toys, tree branches, clothing items, etc.).
•
This device is not meant to be used by persons (including children) with restricted physical, sensory or mental capabilities or
lacking in experience and/or knowledge, unless they are supervised by a person responsible for their safety or instructed on
the use of this device. Children must be supervised so that they do not play with the machine.
•
If the power cable of the transformer is damaged, it must be replaced by the manufacturer or its customer service centre or
a similarly qualied person in order to prevent all risks.
•
To prevent safety risks, make sure that while the robot is operating, there is no one (in particular children, the elderly or the
disabled) and pets in the working area. Monitor the device if you know that pets, children or other persons are nearby.
•
Never allow people to sit on the robot.
•
Never lift the robot to inspect the blade while it is running or to carry it.
•
Do not place hands and feet under the robot when it is in operation and moving, especially near the wheel area.
•
Never remove, bypass or tamper with the safety devices installed. The failure to observe these requirements may lead to
serious personal health and safety risks.
•
Perform all maintenance activities recommended by the manufacturer. Proper maintenance will allow obtaining the best
performances and longer operating times.
•
Before releasing or doing any maintenance and adjustments that can also be done by the user with a minimum of technical