Troubleshooting guide

16
C
G
6
Install the shield using self-tapping screw (Key C) as shown.
Attach the rotisserie burner tube using machine screws (Key G)
as shown.
I
22
21
20
4
Attach the control panel (20) to the front of the barbecue by using
machine screws (Key I) as shown. Attach the control knobs (21) to
the valves as shown. Attach the igniter (smaller) knob (22) to the
igniter as shown.
5
Connect the gas tube to the rotisserie burner as shown.
Very Important!
Burner tubes must engage valve
openings. Make sure the valves
are aligned with burner tubes.
Connect the igniter wires
(Main and rotisserie burner)
to electrode as shown.