User's Manual

Launch SynCast Mac software
1. Launch the SynCast software, the pairing wizard window shows up.
2. Pairing the SynCast and SynCast Display
SynCast client should connect to the same network with the SynCast Share receiver. You can
refer to the information on standby screen of SynCast Share receiver.
Depending on the connection status, 3 types of pairing method.
Type A
Client connects to the router via Wi-Fi
SynCast Share connects to the router via Wi-Fi or LAN
Type B
Client connects to the router via LAN
SynCast Share connects to the router via LAN or Wi-Fi
Type C
Using HotSpot of the receiver device platform. (Need dedicated Wi-Fi
module)
Client connects to SynCast Share via Wi-Fi HotSpot of the receiver device
directly.
General Pairing Steps