User's Manual

Annotator
Click , the annotator will show on the left side of screen.
1. Main functions
Mode selection
Function Description
Use the screen mode to draw. It will use a transparent layer over the
mirrroring screen to show the drawing.
Use the sketch mode to draw. It will use a white plain layer over the
mirrroring screen to show the drawing.
Exit the Annotator
In the screen mode
Function Description
Save the drawing to the file.
Pause the drawing, and back to the mirroring screen to use your PC.
Discard any drawing and back to the mode selection.
In the sketch mode
Function Description
Save the drawing to the file.
Pause the drawing, and back to the mirroring screen to use your PC.
Discard any drawing and back to the mode selection.
2. Drawing Tool Bar
Right click the mouse to lauch the drawing tool bar. You should do the same commend with
mouse touchpad on touch screen. (Click behavior may be vary on each device.)
Pen to draw the line.
Clean all drawing
Light marker to draw to point out the
important area.
Undo
Text Box
Redo
Shape Tool
Close the drawing tool bar.
Eraser to erase the drawing area