Installation manual

PEDESTAL POSITIONING FOR OUTWARD OPENING GATES
b
#
A
B
C
Gate Opening
Angle (Degrees)
100 to 400 (120)
100 to 400 (120)
100 to 380 (120)
100 to 260 (120)
520 to 640 (580)
440 to 660 (580)
360 to 620 (400)
340 to 580 (480)
550 to 600 (600)
550 to 600 (600)
550 to 650 (650)
90
100
110
120
Hinge Centre to
Gate Bracket
Gate Edge or
Hinge Point to
Shaft Centre
Hinge Centre to
Shaft Centre
60
70
80
240 to 530 (250)
150 to 440 (160)
100 to 400 (120)
600 to 660 (640)
580 to 640 (620)
560 to 660 (580)
500 (500)
500(500)
500 to 550 (550)
550 to 600 (600)
o
110
o
120
o
100
o
90
o
80
o
70
o
60
Gate opening angle
o
0
Figure 9 Pedestal Positioning for Outward Opening Gates
It is recommended to fit end stops in the
open position of the gate to reduce gate
movement when open.
© Centurion Systems (Pty) Ltd.
BE SURE TO USE A ‘LONG’ CONNECTING ARM
FOR THIS INSTALLATION TYPE.
Page 18

Ensure that the gate does not exceed the relevant specifications on page 9.

Recommended values are shown in bold type.

All dimensions shown are indicated in millimetres.

All recommended values will result in gates with similar opening times.