Installation manual

Use this procedure to accurately determine the gate opening angle:
Page 44
Determine Gate Swing AngleDetermine Gate Swing AngleDetermine Gate Swing Angle
1 351mm
1 474mm
1 587mm
1 687mm
1 587mm
1 687mm
1 732mm
GATE SWING ANGLE
90 Degrees
100 Degrees
110 Degrees
120 Degrees
60 Degrees
70 Degrees
80 Degrees
1 000mm
VALUE Z FROM...
1 075mm
1 218mm
1 075mm
...TO
1 218mm
1 351mm
1 475mm
Step 3
1m
Z
Open the gate and measure a
distance along the gate a
distance of 1m from the gate
hinge.
Make a mark on the ground.
Measure the distance on the
ground between the two marks
(Z). Using this Z value, read off
the gate opening angle from the
table below.
Step 2
1m
Close the gate and measure a distance of 1m
from the gate hinge.
Make a mark on the ground.
Step 1